Discoloration effect of IML process is one of the applications of IML process
Discoloration process is also suitable for IML process decorative shell, the common IML process discoloration has two ways: temperature change and night light. Temperature change, as the name implies, changes color when encountering temperature change; night light, that is, ornaments will glow in the night.
21
2020
/
04
The color-changing effect of IML technology is one of the applications of IML technology.
The color-changing process is also applicable to IML (In-Mold Labeling) decorative shells. Common color-changing methods in IML include temperature change and glow-in-the-dark. Temperature change, as the name suggests, changes color in response to temperature variations; glow-in-the-dark means that the decorative piece will emit light in the dark.
21
2022
/
04
High-paying recruitment for Sales Director
II. Industry Field Requirements: 1) Experience in sales of plastic structural parts, hardware stamping, consumer electronics, molds, etc. is acceptable; 2) Experience in sales in the home appliance sector, such as automotive parts, mobile phones, vacuum cleaners, smart door locks, etc. is acceptable; 3) Under 40 years old, with a private car; 4) Vocational school or high school education or above.
09
2022
/
11
IMD (In-Mold Decoration) process
IMD Technology - In-Mold Decoration and Injection Molding Technology, in-mold injection is a relatively new panel processing technology. Since the early 1990s, it has evolved from a double-layer film bonding structure to a three-dimensional molding technology with multi-material injection molding. It has now become a popular nameplate technology, transforming the rigid pattern of flat panels into a combination of film, printed graphics, and ink with resin injection. The graphics and labels are embedded in the injection mold cavity and then molded together. The injection resin bonds with the ink layer on the back of the film, placing the panel graphics and labels between the film and the resin formed by injection molding, ensuring that the graphics and labels do not wear off due to friction or the passage of time.
12
2022
/
09
Limit values for the structural design of IML (In-Mold Labeling) process products.
IML Process Product Structure Q&A: 1. For small electronic cigarette components, the overall thickness needs to be above 1.2mm, with a limit of 1.00mm. For larger products (such as door locks, robotic vacuum cleaner covers, and large panels), the overall adhesive thickness should be above 2.5mm. 2. The slope of the product edges (draft angle) should be above 3 degrees.
30
2022
/
08
What should be noted in IML mold design?
1. When designing the layout of IML molds, multi-cavity products must be placed in the same direction (cannot be rotated, only translated), which facilitates the placement of sheets during injection molding. 2. To facilitate the insertion of sheets, the mold must be designed to allow for free rotation during installation, and the mold base must have lifting holes processed on all four sides.
25
2022
/
08
Application Scenarios of IML Technology
Application Scenarios of IML Technology 1. In situations where the product shape remains unchanged but the surface patterns of the product are diversified, production can be carried out using a single set of molds. During the process, only the labeling patterns need to be changed, which saves the number of molds and optimizes the production process, making production more flexible.
23
2022
/
08
What is the difference between IMD and IML? IMD includes IML, IMR, IMF, etc. IMD is a broad category, while IML is a branch of IMD, similar to how vegetables include carrots.
20
2022
/
08
HotLine
Address: No.72, Shenzhu Road, Shenkeng Street, Henggang Town, Longgang District, Shenzhen
